KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel LTE Communication Module
£119.00
INT-GSM LTE is an LTE communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via 2G, 3G or 4G cellular network. The device operates on control panel’s keypad bus. It supports two SIM cards. All cellular data transfers are encrypted in the AES 192 standard.
INT-GSM LTE reports events to two monitoring stations (e.g. security agencies) via cellular network. For this purpose it uses cellular data transfer and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
| Brand | Satel |
|---|
1 in stock
Features
Cooperation with INTEGRA and INTEGRA Plus control panels (version 1.19 or higher)
Two SIM cards support
Possibility to check the pre-paid account balance
Time synchronization with the NTP server or cellular network
Messaging: SMS, CLIP, PUSH, e-mail (INTEGRA Plus)
Remote control: SMS, CLIP, mobile application
Reporting: cellular data (TCP/UDP), SMS messages
Possibility of cooperation with the ETHM-1 Plus Ethernet module (version 2.07 or higher):
Dual Path Reporting, compliant with EN 50136
Backup communication path
Possibility of using the SATEL connection setup service
Remote system operation via INTEGRA CONTROL app
Android (version 4.2.7 or higher)
iOS (version 5.0 or higher)
Programming control panels by using DLOADX (version 1.19.004 or higher)
Supervision of the alarm system by using GUARDX (version 1.19.000 or higher) – remote connection
Cooperation with the INTEGRUM system (integration of multiple alarm systems based on the INTEGRA and INTEGRA Plus control panels)
Module firmware updated remotely using UpServ
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
Price range: £165.00 through £175.00
GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Satel 2 Antennae Wireless Controller
ABAX 2 wireless system controller
ACU-220 uses the 868 MHz (or 915 MHz*) radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels (connection via communication bus), making expansion of the alarm system possible by adding wireless devices. It can also interact with any other alarm control panel, automation controller (when using programmable zones and outputs of the module), or work in stand-alone mode.
ACU-220 meets the high EN 50131 requirements for Grade 2.
An advantage of the controller is its excellent transmission range, which can be up to 2000 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system and antenna diversity. Depending on the level of received radio signal, ACU-220 automatically selects the optimal antenna to be used to receive the transmission.
The system settings are configured in the ABAX 2 Soft program, which is installed on the computer and has also extensive diagnostic capabilities. When working with the INTEGRA, INTEGRA Plus, VERSA or PERFECTA 64 M control panels, the DLOADX or PERFECTA Soft program or a keypad are used for the configuration. The settings can be changed and the firmware of enrolled wireless devices can be updated by radio, without having to demount them.
Satel 4.3″ Touch Screen Keypad with MIFARE Card Reader
The INT-TSG2R keypad is designed for operating and programming the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels, It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors.
Satel GPRS Communication Module
INT-GSM is a GPRS communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via GSM network. The device operates on control panel’s keypad bus.
It supports two SIM cards, through which it can receive messages and incoming calls - at the same time. All GPRS transmissions are encrypted in the AES-192 standard.
INT-GSM reports events to two monitoring stations (eg. security agencies) via the GSM network. For this purpose it uses GPRS and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Grade 3 Control Panel
Due to their full compliance with the requirements of EN50131 Grade 3, the INTEGRA Plus control units are perfectly fit for implementation of advanced security systems at locations with particularly high risk of burglary, such as banks, jewellery stores or public utility facilities. The control units are characterised by extended functionality, due to which they can be used for implementation of access control systems or even intelligent building solutions.
Satel Output Expansion Module
The output expansion module, designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families, as well as with ACCO-NT2 access control panel. This device replaces the CA-64 O-OC, CA-64 O-R and CA-64 O-ROC modules. The INT-O allows for expansion of the system by additional 8 wired outputs. An additional tamper input helps detect unauthorized opening of the enclosure in which the module is installed.
Reviews
There are no reviews yet.