KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Programming Cable for Satel Devices
Satel 2 Antennae Wireless Controller
ABAX 2 wireless system controller
ACU-220 uses the 868 MHz (or 915 MHz*) radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels (connection via communication bus), making expansion of the alarm system possible by adding wireless devices. It can also interact with any other alarm control panel, automation controller (when using programmable zones and outputs of the module), or work in stand-alone mode.
ACU-220 meets the high EN 50131 requirements for Grade 2.
An advantage of the controller is its excellent transmission range, which can be up to 2000 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system and antenna diversity. Depending on the level of received radio signal, ACU-220 automatically selects the optimal antenna to be used to receive the transmission.
The system settings are configured in the ABAX 2 Soft program, which is installed on the computer and has also extensive diagnostic capabilities. When working with the INTEGRA, INTEGRA Plus, VERSA or PERFECTA 64 M control panels, the DLOADX or PERFECTA Soft program or a keypad are used for the configuration. The settings can be changed and the firmware of enrolled wireless devices can be updated by radio, without having to demount them.
Satel 4.3″ Touch Screen Keypad with MIFARE Card Reader
The INT-TSG2R keypad is designed for operating and programming the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels, It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel 433 MHz Remote Keyfob Receiver
Satel 7″ Customisable Touch Screen Keypad
The INT-TSI keypad is a real command center for a smart alarm system. As its interface can be customized to individual user's needs, it provides a perfect solution both for people expecting ease of operation and for advanced users who make use of the extended system functionality.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel 7″ Touch Screen Keypad with MIFARE Card Reader
The INT-TSH2R keypad is dedicated for operating and programming the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels. It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel 8 Zone Expansion Module
The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families as well as with ACCO-NT2 access control panel. This device replaces the CA-64 E/CA-64 EPS module. The INT-E offers expansion of the system by 8 wired zones as well as allows direct connection of roller shutter and vibration detectors. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed.
Satel Addressable Bus Expansion Module
The module is designed for connecting addressable detectors to the control panels of INTEGRA and INTEGRA Plus families. This device replaces the CA-64 ADR module. The use of INT-ADR facilitates wiring, particularly where extensive systems are involved. The addressable detector bus is independent of the control panel expander bus, which makes possible the hybrid implementation of systems, combining addressable and directly connected components.
Satel Addressing Module for INT-ADR
Satel Cable for Connecting RS Ports of Integra
Satel Card Reader
The CR-MF3 reader can operate as a proximity card reader in the INTEGRA alarm system, a proximity card reader in the ACCO NET or ACCO access control system, a proximity card reader in systems of other manufacturers (OSDP, Wiegand), or a standalone door control module.
Select options
This product has multiple variants. The options may be chosen on the product page