KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel 2 Antennae Wireless Controller
£85.00
ABAX 2 wireless system controller
ACU-220 uses the 868 MHz (or 915 MHz*) radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels (connection via communication bus), making expansion of the alarm system possible by adding wireless devices. It can also interact with any other alarm control panel, automation controller (when using programmable zones and outputs of the module), or work in stand-alone mode.
ACU-220 meets the high EN 50131 requirements for Grade 2.
An advantage of the controller is its excellent transmission range, which can be up to 2000 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system and antenna diversity. Depending on the level of received radio signal, ACU-220 automatically selects the optimal antenna to be used to receive the transmission.
The system settings are configured in the ABAX 2 Soft program, which is installed on the computer and has also extensive diagnostic capabilities. When working with the INTEGRA, INTEGRA Plus, VERSA or PERFECTA 64 M control panels, the DLOADX or PERFECTA Soft program or a keypad are used for the configuration. The settings can be changed and the firmware of enrolled wireless devices can be updated by radio, without having to demount them.
| Brand | Satel |
|---|
1 in stock
Features
Compliance with the EN 50131 Grade 2 requirements
Two-way radio communication in the 868 MHz* band – 4 channels
Range up to 2000 m in the open area
Support for up to 48 wireless devices
Support for wireless keypads: INT-KWRL2 – up to 4, VERSA-KWRL2 – up to 6, PRF-LCD-A2 – up to 4
Support for up to 256 APT-200 wireless keyfobs
Works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels – connection to the communication bus
Option of autonomous operation or with any alarm control panel / controller
8 programmable outputs
4 programmable zones
4 outputs indicating the state of controller and connected wireless devices
Antenna diversity – automatic selection of the antenna that will be used to receive the Transmission, depending on the level of received signal
Programming controller settings via:
Service menu of the control panel or DLOADX program – when working with the INTEGRA, INTEGRA Plus or VERSA control panels
Service menu of the control panel or PERFECTA Soft program – when working with the PERFECTA 64 M control panels
ABAX 2 Soft program – when the controller is working as a universal module of wireless devices (in stand-alone mode or with any control panel/controller)
Firmware update without demounting of the controller
Remote configuration and updating of devices registered to the controller
Tamper protection
Power supply: 12 V DC
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
Price range: £165.00 through £175.00
GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Satel 4.3″ Touch Screen Keypad with MIFARE Card Reader
The INT-TSG2R keypad is designed for operating and programming the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels, It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors.
Satel 8 Zone Expansion Module
The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families as well as with ACCO-NT2 access control panel. This device replaces the CA-64 E/CA-64 EPS module. The INT-E offers expansion of the system by 8 wired zones as well as allows direct connection of roller shutter and vibration detectors. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed.
Satel Compact Wireless System Controller
ACU-280 provides two-way, encrypted (AES standard) communication in the 868 MHz (or 915 MHz)* band - all radio transmissions between components of the ABAX 2 system are acknowledged. It works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels, enabling wireless devices to be added to the alarm system.
Because of its small size, it requires little space for installation.
The device meets the high EN 50131 requirements for Grade 2.
An advantage of the controller is its excellent transmission range, which can be up to 1600 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system.
The controller can be programmed via the control panel, a keypad, or the DLOADX or PERFECTA Soft configuration programs. For advanced diagnostics of the wireless system operation, the ABAX 2 Soft program is used. Configuration, as well as firmware upgrade and testing of enrolled wireless devices are carried out by radio, without having to demount them.
Satel Outdoor Optical and Acoustic Siren
The SP–4004 siren distinguishes itself with its technology of
protection against harsh environmental conditions. This protection
allows it to ensure full compliance with the rigorous requirements of
EN50131 for the Grade 2 sounders. Optional backup battery allows
to use the SP–4004 in a self contained mode for the installations in
places particularly exposed to tampering risk
Satel Output Expansion Module
The output expansion module, designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families, as well as with ACCO-NT2 access control panel. This device replaces the CA-64 O-OC, CA-64 O-R and CA-64 O-ROC modules. The INT-O allows for expansion of the system by additional 8 wired outputs. An additional tamper input helps detect unauthorized opening of the enclosure in which the module is installed.
Satel Voice Messages Generator with Speaker Output
The INT-VMG module is designed for playback of voice messages in the facility, triggered by the control panel. It can be used to provide information and warning messages, as well as to make operation of the alarm system easier e.g. for the elderly or children. In addition, the ability to record any sound enables the module to be used to play back the specific warning sounds. The built-in amplifier allows direct connection of an external speaker, and the line output allows connection to the PA system in the building. Messages are recorded in the device memory using the delivered firmware with the written text to speech conversion feature, so there is no need for lector support when they are being recorded.
Reviews
There are no reviews yet.