KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel DIN Rail Zone and Output Expansion Module
The INT-IORS module allows expansion of the INTEGRA and ACCO NET systems by 8 programmable relay outputs and 8 zones with support for NO, NC, EOL and 2EOL configuration. This module is designed for implementation of direct operation of 230 V devices using the INTEGRA control panel. It is an ideal option where the capabilities offered by the INTEGRA control panels are to be used to create an automation system. The device can also work with ACCO-NT access control panels. The INT-IORS module is designed for mounting on a standard 35 mm DIN rail.
Satel Dual Technology Motion Detector
SLIM-DUAL detects motion in the protected area. The device can be installed on the BRACKET D adjustable wall-and-ceiling mounting holder.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel GPRS Communication Module
INT-GSM is a GPRS communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via GSM network. The device operates on control panel’s keypad bus.
It supports two SIM cards, through which it can receive messages and incoming calls - at the same time. All GPRS transmissions are encrypted in the AES-192 standard.
INT-GSM reports events to two monitoring stations (eg. security agencies) via the GSM network. For this purpose it uses GPRS and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Grade 2 Control Panel
Advanced alarm control units providing alarm functions and optional implementation of home automation and access control systems. With a broad range of extension modules, their applications can be adapted to individual needs: from minor systems to extensive installations. Communication features combined with additional modules, such as GSM and TCP/IP, are a major advantage of the INTEGRA control units.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel Grade 3 Control Panel
Due to their full compliance with the requirements of EN50131 Grade 3, the INTEGRA Plus control units are perfectly fit for implementation of advanced security systems at locations with particularly high risk of burglary, such as banks, jewellery stores or public utility facilities. The control units are characterised by extended functionality, due to which they can be used for implementation of access control systems or even intelligent building solutions.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel Indoor Acoustic Siren
SPW-210-BL is a siren with acoustic signaling, designed for indoor installation and provided with piezoelectric transducer. There are three types of modulated tones with 120 dB intensity to choose from. The loud signal ensures good audibility over a large area, e.g. in warehouses, production halls, parking lots inside buildings, etc. Enclosure of the siren is made of polycarbonate, thus ensuring high mechanical strength and aesthetic appearance of the device that remains unchanged over time. The siren is provided with tamper protection against opening or tearing off the wall. This model complies with the EN 50131-1 requirements for Grade 2 security.
Satel Keypad with Card Reader
The SO-MF5 keypad can operate as a INT-SCR partition keypad in the INTEGRA alarm system, a ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system, a keypad with a proximity card reader for other manufacturers (OSDP, Wiegand), or a standalone door control module.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel Keypad with Card Reader for Outdoor Use
The CR-MF5 keypad can operate as a INT-SCR partition keypad in the INTEGRA alarm system, a ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system, a keypad with proximity card reader in systems of other manufacturers (OSDP, Wiegand), or a standalone door control module.
Satel LCD Keypad with Touch Buttons and Card Reader
The INT-KSG2R keypad with touch keys is designed for operating and programming the INTEGRA and INTEGRA Plus series control panels, as well as the PERFECTA 64 M control panel. It is a device intended for those who appreciate attractive design, while at the same time wish to operate the alarm system and building automation components in the manner known from traditional keypads.
Select options
This product has multiple variants. The options may be chosen on the product page
Satel LTE Communication Module
INT-GSM LTE is an LTE communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via 2G, 3G or 4G cellular network. The device operates on control panel’s keypad bus. It supports two SIM cards. All cellular data transfers are encrypted in the AES 192 standard.
INT-GSM LTE reports events to two monitoring stations (e.g. security agencies) via cellular network. For this purpose it uses cellular data transfer and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Multi-function Keypad with Proximity Card Reader for Outdoor Use
The partition keypad is designed for easy operation of a single partition in the INTEGRA system, perfectly fit for systems where single partitions constitute functionally separated subsystems. With the built-in proximity card reader, partitions can be handled without a password, and the air-tight housing allows for outdoor installation.
Satel Outdoor Optical and Acoustic Siren
The SP–4004 siren distinguishes itself with its technology of
protection against harsh environmental conditions. This protection
allows it to ensure full compliance with the rigorous requirements of
EN50131 for the Grade 2 sounders. Optional backup battery allows
to use the SP–4004 in a self contained mode for the installations in
places particularly exposed to tampering risk