KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel Multi-function Keypad with Proximity Card Reader for Outdoor Use
£55.00
The partition keypad is designed for easy operation of a single partition in the INTEGRA system, perfectly fit for systems where single partitions constitute functionally separated subsystems. With the built-in proximity card reader, partitions can be handled without a password, and the air-tight housing allows for outdoor installation.
| Brand | Satel |
|---|
1 in stock
Features
Partition keypad and entry keypad modes
Proximity card reader
LEDs for partition state indication
Buzzer for acoustic signaling
Keypad backlight
Optical tamper for opening and removal from mounting surface
Relay for electromagnetic lock/electric strike
Door sense input
Doorbell button
Outdoor operation
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
Price range: £165.00 through £175.00
GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
GVS KNX Smart Touch S7
Another innovative and full featured intelligent building controller from GVS, the KNX Smart Touch S7 is a 7" KNX smart control panel with native SIP capability for intercom and access control as well as options to add physical pushbuttons. This brings traditional switch, contemporary touch control and secure access control to a single elegant panel. The S7 can be mated with a smartphone application for ultimate convenience and versatility.
Satel 7″ Touch Screen Keypad with MIFARE Card Reader
The INT-TSH2R keypad is dedicated for operating and programming the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels. It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors.
Satel 8 Zone Expansion Module
The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families as well as with ACCO-NT2 access control panel. This device replaces the CA-64 E/CA-64 EPS module. The INT-E offers expansion of the system by 8 wired zones as well as allows direct connection of roller shutter and vibration detectors. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed.
Satel DIN Rail Output Expansion Module
The INT-ORS module allows for expansion of the INTEGRA/VERSA/PERFECTA and ACCO NET systems by 8 programmable relay outputs. It is designed for implementation of direct operation of 230 V devices using control panels of the INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families. This module is also a great option where the capabilities offered by these panels are to be used to create an automation system. The device can also work with ACCO-NT2 access control panels. The INT-ORS is designed for mounting on a standard 35 mm DIN rail.
Satel GPRS Communication Module
INT-GSM is a GPRS communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via GSM network. The device operates on control panel’s keypad bus.
It supports two SIM cards, through which it can receive messages and incoming calls - at the same time. All GPRS transmissions are encrypted in the AES-192 standard.
INT-GSM reports events to two monitoring stations (eg. security agencies) via the GSM network. For this purpose it uses GPRS and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Grade 3 Control Panel
Due to their full compliance with the requirements of EN50131 Grade 3, the INTEGRA Plus control units are perfectly fit for implementation of advanced security systems at locations with particularly high risk of burglary, such as banks, jewellery stores or public utility facilities. The control units are characterised by extended functionality, due to which they can be used for implementation of access control systems or even intelligent building solutions.
Satel Keypad with Card Reader for Outdoor Use
The CR-MF5 keypad can operate as a INT-SCR partition keypad in the INTEGRA alarm system, a ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system, a keypad with proximity card reader in systems of other manufacturers (OSDP, Wiegand), or a standalone door control module.
Satel Output Expansion Module
The output expansion module, designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families, as well as with ACCO-NT2 access control panel. This device replaces the CA-64 O-OC, CA-64 O-R and CA-64 O-ROC modules. The INT-O allows for expansion of the system by additional 8 wired outputs. An additional tamper input helps detect unauthorized opening of the enclosure in which the module is installed.
Reviews
There are no reviews yet.