KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel Addressable Bus Expansion Module
£55.00
The module is designed for connecting addressable detectors to the control panels of INTEGRA and INTEGRA Plus families. This device replaces the CA-64 ADR module. The use of INT-ADR facilitates wiring, particularly where extensive systems are involved. The addressable detector bus is independent of the control panel expander bus, which makes possible the hybrid implementation of systems, combining addressable and directly connected components.
| Brand | Satel |
|---|
1 in stock
Features
Dedicated independent addressable detector bus
Support for addressable detectors based on CA-64 ADR-MOD module
Capability of system expansion with up to 48 addressable zones
Ability to connect to RS-485 bus (firmware update via the bus)
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
Price range: £165.00 through £175.00
GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Satel 2 Antennae Wireless Controller
ABAX 2 wireless system controller
ACU-220 uses the 868 MHz (or 915 MHz*) radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64 M control panels (connection via communication bus), making expansion of the alarm system possible by adding wireless devices. It can also interact with any other alarm control panel, automation controller (when using programmable zones and outputs of the module), or work in stand-alone mode.
ACU-220 meets the high EN 50131 requirements for Grade 2.
An advantage of the controller is its excellent transmission range, which can be up to 2000 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system and antenna diversity. Depending on the level of received radio signal, ACU-220 automatically selects the optimal antenna to be used to receive the transmission.
The system settings are configured in the ABAX 2 Soft program, which is installed on the computer and has also extensive diagnostic capabilities. When working with the INTEGRA, INTEGRA Plus, VERSA or PERFECTA 64 M control panels, the DLOADX or PERFECTA Soft program or a keypad are used for the configuration. The settings can be changed and the firmware of enrolled wireless devices can be updated by radio, without having to demount them.
Satel Grade 3 Control Panel
Due to their full compliance with the requirements of EN50131 Grade 3, the INTEGRA Plus control units are perfectly fit for implementation of advanced security systems at locations with particularly high risk of burglary, such as banks, jewellery stores or public utility facilities. The control units are characterised by extended functionality, due to which they can be used for implementation of access control systems or even intelligent building solutions.
Satel Outdoor Optical and Acoustic Siren
The SP–4004 siren distinguishes itself with its technology of
protection against harsh environmental conditions. This protection
allows it to ensure full compliance with the rigorous requirements of
EN50131 for the Grade 2 sounders. Optional backup battery allows
to use the SP–4004 in a self contained mode for the installations in
places particularly exposed to tampering risk
Satel Plastic Box for Control Panels, Expansion Modules and GSM Modules
OPU-3 P is a robust, surface-mounted enclosure, made of white ABS plastic. Owing to its aesthetic appearance, the enclosure can be installed in conspicuous locations in usable space interiors. The enclosure base can be recessed into the wall so that the enclosure proper can occupy less space. Its neutral design and ample size make it possible to install inside the enclosure many types of SATEL control panels, their extension modules, communication modules, controllers and a large number of other devices. Installation and maintenance of the system components is further facilitated by using special mounting panels. OPU-3 P is provided with double tamper protection against opening the enclosure and tearing it off the wall.
The enclosure has sufficient space for installation of 40VA or 60VA network transformers, and can also accommodate a 7 Ah or 17 Ah, 12 V backup battery. As it neither blocks nor weakens the radio signal, wireless devices including their antennas can be installed inside the enclosure.
Satel Zone and Output Expansion Module
The module is designed for use with the control panels of INTEGRA and INTEGRA Plus families, as well as with ACCO-NT access control panel. This device replaces the CA-64 PP module. The INT-PP allows for expansion of the control panel by additional 8 wired zones and 8 programmable relay and OC outputs. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed.
Reviews
There are no reviews yet.