Satel Digital PIR Motion Detector
£10.00 – £29.00Price range: £10.00 through £29.00
SLIM-PIR detects motion in the protected area. The device can be installed on the BRACKET D adjustable wall-and-ceiling mounting holder.
| Type | Basic, With Emergency Lighting Feature, With 20kg Pet Immunity, With Emergency Lighting Feature + 20kg Pet Immunity, Pro |
|---|---|
| Brand | Satel |
Features
Certificate of compliance with the EN 50131 requirements for Grade 2
Motion detection using passive infrared (PIR) sensor
Adjustable sensitivity of detection
Digital motion detection algorithm
Digital temperature compensation
Wide-angle lens, designed specifically for the SLIM LINE detectors
Option to replace the wide-angle lens with a curtain (CT-CL2) or long-range (LR-CL2) one
Built-in end-of-line resistors (2EOL: 2 x 1.1 kΩ)
LED indicator
Selectable color of the LED indicator (4 colors available)
LED indicator remote enable/disable
Supervision of motion detection and supply voltage circuit
Tamper protection against opening of enclosure
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
£165.00 – £175.00Price range: £165.00 through £175.00GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Satel 8 Zone Expansion Module
The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA, VERSA Plus, PERFECTA families as well as with ACCO-NT2 access control panel. This device replaces the CA-64 E/CA-64 EPS module. The INT-E offers expansion of the system by 8 wired zones as well as allows direct connection of roller shutter and vibration detectors. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed.
Satel Addressable Bus Expansion Module
The module is designed for connecting addressable detectors to the control panels of INTEGRA and INTEGRA Plus families. This device replaces the CA-64 ADR module. The use of INT-ADR facilitates wiring, particularly where extensive systems are involved. The addressable detector bus is independent of the control panel expander bus, which makes possible the hybrid implementation of systems, combining addressable and directly connected components.
Satel Addressing Module for INT-ADR
Satel DIN Rail Zone and Output Expansion Module
The INT-IORS module allows expansion of the INTEGRA and ACCO NET systems by 8 programmable relay outputs and 8 zones with support for NO, NC, EOL and 2EOL configuration. This module is designed for implementation of direct operation of 230 V devices using the INTEGRA control panel. It is an ideal option where the capabilities offered by the INTEGRA control panels are to be used to create an automation system. The device can also work with ACCO-NT access control panels. The INT-IORS module is designed for mounting on a standard 35 mm DIN rail.
Satel GPRS Communication Module
INT-GSM is a GPRS communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via GSM network. The device operates on control panel’s keypad bus.
It supports two SIM cards, through which it can receive messages and incoming calls - at the same time. All GPRS transmissions are encrypted in the AES-192 standard.
INT-GSM reports events to two monitoring stations (eg. security agencies) via the GSM network. For this purpose it uses GPRS and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Grade 3 Control Panel
Due to their full compliance with the requirements of EN50131 Grade 3, the INTEGRA Plus control units are perfectly fit for implementation of advanced security systems at locations with particularly high risk of burglary, such as banks, jewellery stores or public utility facilities. The control units are characterised by extended functionality, due to which they can be used for implementation of access control systems or even intelligent building solutions.
Satel Outdoor Optical and Acoustic Siren
The SP–4004 siren distinguishes itself with its technology of
protection against harsh environmental conditions. This protection
allows it to ensure full compliance with the rigorous requirements of
EN50131 for the Grade 2 sounders. Optional backup battery allows
to use the SP–4004 in a self contained mode for the installations in
places particularly exposed to tampering risk
Satel Voice Messages Generator with Speaker Output
The INT-VMG module is designed for playback of voice messages in the facility, triggered by the control panel. It can be used to provide information and warning messages, as well as to make operation of the alarm system easier e.g. for the elderly or children. In addition, the ability to record any sound enables the module to be used to play back the specific warning sounds. The built-in amplifier allows direct connection of an external speaker, and the line output allows connection to the PA system in the building. Messages are recorded in the device memory using the delivered firmware with the written text to speech conversion feature, so there is no need for lector support when they are being recorded.

KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Multiroom Audio
Reviews
There are no reviews yet.