MDT KNX Bus Power Supply
Click to enlarge
GVS KNX IP Interface 3.0
GVS KNX IP Interface 3.0 -Secure £155.00
Back to products
MDT KNX IP Interface with IP Secure and Data Secure
MDT KNX IP Interface with IP Secure and Data Secure £177.00
MDT

MDT KNX Bus Power Supply

£107.00 – £186.00

The MDT KNX / EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30 V DC) to supply the connected KNX / EIB components. The operating status is indicated via 3 LED.

Current

160 mA

,

320 mA

,

640 mA
Brand

MDT
Compare
Add to wishlist
SKU: N/A Categories: ,
Description

Features

KNX power supply with integrated choke
Mains voltage 230 V AC
Short-circuit-proof
Overload safe
Temperature control with shutdown on over temperature
LED indicator for bus reset, normal operation and bus overload
Choke free output (STV-640.02 only)
Modular installation device for DIN 35 mm rails
Integrated bus coupling unit

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MDT KNX Bus Power Supply”

Your email address will not be published. Required fields are marked *

About brand

Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.

Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.

MORE PRODUCTS
GVS KNX 1-10V Dimming Actuator

GVS KNX 1-10V Dimming Actuator 4-fold

,
£165.00 – £175.00
Select options This product has multiple variants. The options may be chosen on the product page
Compare
Quick view
Add to wishlist
GVS KNX Air Quality Sensor V2

GVS KNX Air Quality Sensor V2

,
£305.00
Select options This product has multiple variants. The options may be chosen on the product page
Compare
Quick view
Add to wishlist
GVS KNX Binary Input 4-fold

GVS KNX Binary Input 4-fold

,
£115.00
Add to cart
Compare
Quick view
Add to wishlist
Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GVS KNX IP Interface -Secure
Compare

GVS KNX IP Interface -Secure

,
£155.00
RJ45 socket for10/100Base-T, IEEE 802.3 network, auto sensing, support max. 5 clients.Support KNX IP Secure, No need auxiliary power.
Add to wishlist
Add to cart
Quick view
GVS KNX IP Interface 3.0
Compare

GVS KNX IP Interface 3.0 -Secure

,
£155.00
RJ45 socket for10/100Base-T, IEEE 802.3 network, auto sensing, remote programming.Project management, support 4 local clients & 1 KNXnet/IP Device Manager.
Add to wishlist
Add to cart
Quick view
GVS KNX IP Router
Compare

GVS KNX IP Router -Secure

,
£365.00
The IP Router can be used as line or backbone coupler. It provides a data connection between the upper KNXnet/IP line (main line or backbone) and the lower TP KNX bus line (sub line). The basic functionality of the IP Router is to couple the Ethernet with one or more KNX-TP lines. The IP Router features a galvanic isolation between the Ethernet and the KNX-TP line(s). Due to its flexibility the IP Router can be used as a line coupler e.g. to connect several KNX TP lines via Ethernet. And it can be used as a backbone coupler to connect several TP areas or different TP installation systems via Ethernet. The device supports the KNX Secure protocol (KNXnet/IP Security).
Add to wishlist
Add to cart
Quick view
GVS KNX Line Coupler UK
Compare

GVS KNX Line Coupler

,
£275.00
Can be used as line coupler, backbone coupler or line repeater, fi lter table for line-crossingtelegrams. Installation: DIN-rail Mounted
Add to wishlist
Add to cart
Quick view
GVS KNX Power Supply 4SU
Compare

GVS KNX Power Supply 4SU

,
£165.00
Input voltage 95V-255V AC, 50/60Hz, output 1: 30V DC +1/-2V, SELV with choke; output 2:30V DC +1/- 2V,SELV without choke, total 640mA, short -circuit-protection. Current levelindicator. The minimum distance betwee 2 power supply in a line is 300meter
Add to wishlist
Add to cart
Quick view
Sold out
GVS KNX USB Interface
Compare

GVS KNX USB Interface

,
£115.00
The KNX TP-USB Interface is designed for an intelligent building control system, which is used for facilitating communication between the PC and the KNX system. The device can connect the USB communication interface to the computer through a standard type A USB2.0 interface extension line, and the other end of the device can be connected to the KNX bus via a bus connection terminal. If the KNX bus on the device side is long enough, it can also be directly connected to the computer without USB extension line.
Add to wishlist
Read more
Quick view
MDT KNX IP Router with IP Secure and Data Secure
Compare

MDT KNX IP Router with IP Secure and Data Secure

,
£266.00
KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.
Add to wishlist
Add to cart
Quick view
MDT KNX Safety Module
Compare

MDT KNX Safety Module

,
£125.00
The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the outdoor area.A manipulation of the device programming is no longer possible. The safety function is started automatically after bus voltage recovery / programming of the safety module. The integrated device monitoring system controls up to 100 KNX devices cyclically. As soon as a device is missing or no longer responds due to a defect, an alarm message is sent.
Add to wishlist
Add to cart
Quick view