KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
GVS KNX IP Interface -Secure
£155.00
RJ45 socket for10/100Base-T, IEEE 802.3 network, auto sensing, support max. 5 clients.Support KNX IP Secure, No need auxiliary power.
| Brand |
GVS |
|---|
1 in stock
Description
Specifications
Weight: 0.1KG
Dimensions: 36×90×64 mm
Operation voltage: 21-30V DC, via the KNX bus
Current consumption: <19.5mA, 24V; <15.5mA, 30V
Power consumption: <470mW
Housing, colour: Plastic housing, Beige
Connections: KNX, Via bus connection terminal (red/black)
Operation: – 5 °C … + 45 °C
Storage: –25 °C … + 55 °C
Transport : – 25 °C … + 70 °C
Humidity: <93%, except condensation
Design: Modular installation device, on 35mm mounting rail
Reviews (0)
About brand
Shipping & Delivery
Related products
GVS KNX IP Router -Secure
The IP Router can be used as line or backbone coupler. It provides a data connection between the upper KNXnet/IP line (main line or backbone) and the lower TP KNX bus line (sub line). The basic functionality of the IP Router is to couple the Ethernet with one or more KNX-TP lines. The IP Router features a galvanic isolation between the Ethernet and the KNX-TP line(s). Due to its flexibility the IP Router can be used as a line coupler e.g. to connect several KNX TP lines via Ethernet. And it can be used as a backbone coupler to connect several TP areas or different TP installation systems via Ethernet. The device supports the KNX Secure protocol (KNXnet/IP Security).
GVS KNX USB Interface
The KNX TP-USB Interface is designed for an intelligent building control system, which is used for facilitating communication between the PC and the KNX system. The device can connect the USB communication interface to the computer through a standard type A USB2.0 interface extension line, and the other end of the device can be connected to the KNX bus via a bus connection terminal. If the KNX bus on the device side is long enough, it can also be directly connected to the computer without USB extension line.
MDT KNX Safety Module
The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the outdoor area.A manipulation of the device programming is no longer possible. The safety function is started automatically after bus voltage recovery / programming of the safety module. The integrated device monitoring system controls up to 100 KNX devices cyclically. As soon as a device is missing or no longer responds due to a defect, an alarm message is sent.
Reviews
There are no reviews yet.