KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
Satel GPRS Communication Module
INT-GSM is a GPRS communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via GSM network. The device operates on control panel’s keypad bus.
It supports two SIM cards, through which it can receive messages and incoming calls - at the same time. All GPRS transmissions are encrypted in the AES-192 standard.
INT-GSM reports events to two monitoring stations (eg. security agencies) via the GSM network. For this purpose it uses GPRS and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel Integration Module for Integra Panel and KNX Automation System
The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels.
The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
Satel IP Communication Module
The ETHM-1 Plus communication module makes it possible to use Ethernet communication in the control panels of INTEGRA, INTEGRA Plus and VERSA families. It provides the capability of reporting and remote programming of the control panels. The ETHM-1 Plus module offers the functionality of remote control of the system via the Internet, using a computer, tablet or smartphone.
Satel LTE Communication Module
INT-GSM LTE is an LTE communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via 2G, 3G or 4G cellular network. The device operates on control panel’s keypad bus. It supports two SIM cards. All cellular data transfers are encrypted in the AES 192 standard.
INT-GSM LTE reports events to two monitoring stations (e.g. security agencies) via cellular network. For this purpose it uses cellular data transfer and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses).
Satel RS-232 Interface for Third Party System Integration
Satel Voice Messages Generator with Speaker Output
The INT-VMG module is designed for playback of voice messages in the facility, triggered by the control panel. It can be used to provide information and warning messages, as well as to make operation of the alarm system easier e.g. for the elderly or children. In addition, the ability to record any sound enables the module to be used to play back the specific warning sounds. The built-in amplifier allows direct connection of an external speaker, and the line output allows connection to the PA system in the building. Messages are recorded in the device memory using the delivered firmware with the written text to speech conversion feature, so there is no need for lector support when they are being recorded.
Satel Voice Module
INT-VG enables remote control of VERSA and INTEGRA security system over telephone line with user friendly voice menu. With INT-VG it is possible not only to arm or disarm the system, but also to get detailed information on system status or control appliances attached to the panel. On top of this, the module can be used as an 16-message “voice synthesizer” for voice notification on selected system events.