KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
GVS KNX IR Transmitter Flush-mounted 2-fold
£105.00
Transimitting distance max. 2m, 1 fold 10A current detection. Support normal IR control of 30 IR codes, for air-condition control up to 266 IR codes. Support DCA APP in ETS configuration.Installation: Flush Mounted, fits in 86*86mm and German 60mm wall boxes.
| Brand |
GVS |
|---|
1 in stock
Description
Specifications
Weight: 0.04kg
Dimension: φ53×23.5mm
Bus voltage: 21-30V DC, via the KNX bus
Bus current: <6.5mA, 24V ；<6mA, 30V
Bus consumption: <180mW
Dynamic current: <9.5mA, 24V ；<8mA, 30V
Connection: KNX, Bus connection terminal(Red/Black)
Operation: -5 °C … 45 °C
Storage: -25 °C … 55 °C
Transport : -25 °C … 70 °C
Humidity: <93%, except dewing
IR wavelength: 940nm
Reviews (0)
About brand
Shipping & Delivery
Related products
MDT KNX DALI Control 64 Gateway
The MDT DALI Control 64 Gateway forms the interface between the KNX and the DALI bus. For example, it enables the existing DALI lights to be switched and dimmed using the MDT glass or plastic push-buttons. The gateway supports DALI and DALI-2 compliant lights/ballasts, from single colour to Tunable White, to RGB(W).
MDT KNX DALI Control IP64 Gateway
The MDT DALI Control IP 64 Gateway forms the interface between the KNX and the DALI bus. Using the integrated web interface, DALI commissioning and electronic ballast replacement is also possible without using the ETS. For example, the gateway enables the existing DALI lights to be switched and dimmed using the MDT glass or plastic push-buttons. The gateway supports DALI and DALI-2 compliant lights/ballasts, from single colour to Tunable White, to RGB(W).
MDT KNX DALI Control Pro64 Gateway
The MDT DALI Control PRO64 Gateway is a multi-master application controller for controlling electronic ballasts (ECG) with a DALI interface using the KNX bus. Aside from supporting DALI and DALI-2 compliant lights/ballasts, up to 8 DALI-2 motion detectors or light sensors can be connected. Using the integrated web interface, DALI commissioning and electronic ballast replacement is also possible without using the ETS.
Satel Integration Module for Integra Panel and KNX Automation System
The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels.
The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
Reviews
There are no reviews yet.