KNX Touchscreen & Switch
KNX Actuator
KNX System Device
KNX Internal Sensor
KNX External Sensor
KNX Input / Outputs
KNX Logic & Timing
KNX Energy
KNX Visualisation
KNX Protocol Gateway
Access Control
Intruder Alarm
CCTV
Automated Entry
Networking
VOIP/SIP
Amp & AVR
Speakers
Multiroom Audio
MDT KNX DALI Control IP64 Gateway
£377.00
The MDT DALI Control IP 64 Gateway forms the interface between the KNX and the DALI bus. Using the integrated web interface, DALI commissioning and electronic ballast replacement is also possible without using the ETS. For example, the gateway enables the existing DALI lights to be switched and dimmed using the MDT glass or plastic push-buttons. The gateway supports DALI and DALI-2 compliant lights/ballasts, from single colour to Tunable White, to RGB(W).
| Brand | MDT |
|---|
1 in stock
Features
Individual control of up to 64 ECG / 16 DALI groups
Supports DALI and DALI-2 standard, as well as DALI DT6 / DT8 ECG
Innovative HSV color control, RGB, RGBW and XY color according to Dali DT8 standard (16 DALI groups)
Tunable White, color temperature control (16 DALI groups)
Operation modes incl. normal operation, continuous operation, night operation, stairwell operation and panic operation
Test mode for systems with emergency lights that were supplied through central batteries
Support of single battery emergency lights DT-1
Integrated color control module for time-dependent control
Manual operation for all 16 groups
16 scenes with individual dimming times
Energy saving function for switching off the ECGs in the 16 DALI groups (via additional KNX switch actuator)
Simple group attribution directly on the device
Dali commissioning via web browser or directly on the device display
Fault detection of lamp faults and faulty ECGs
Quick exchange of ECG
Free DCA app for commissioning the DALI bus system
Commissioning with ETS5 or higher
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
GVS KNX 1-10V Dimming Actuator 4-fold
Price range: £165.00 through £175.00
GVS KNX Air Quality Sensor V2
£305.00
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
MDT KNX DALI Control 64 Gateway
The MDT DALI Control 64 Gateway forms the interface between the KNX and the DALI bus. For example, it enables the existing DALI lights to be switched and dimmed using the MDT glass or plastic push-buttons. The gateway supports DALI and DALI-2 compliant lights/ballasts, from single colour to Tunable White, to RGB(W).
MDT KNX DALI Control Pro64 Gateway
The MDT DALI Control PRO64 Gateway is a multi-master application controller for controlling electronic ballasts (ECG) with a DALI interface using the KNX bus. Aside from supporting DALI and DALI-2 compliant lights/ballasts, up to 8 DALI-2 motion detectors or light sensors can be connected. Using the integrated web interface, DALI commissioning and electronic ballast replacement is also possible without using the ETS.
Satel Integration Module for Integra Panel and KNX Automation System
The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels.
The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
Reviews
There are no reviews yet.